Condensation: Windows and Wood Movement - Drexel Building Supply

Condensation: Windows and Wood Movement

Condensation Doesn’t Mean A Window Problem

Windows do not cause condensation. Windows serve as visible areas for moisture to condense, warning you that there is too much moisture inside your home. Of course windows don’t manufacture water. If you were out in the desert, you’d want a canteen, not a window. But people seem to believe that windows do manufacture water. They call up window contractors and say “My windows are all wet and it’s the fault of the windows.” Well, not quite… Water on windows is condensation, and it can be a problem. However, it’s not a window problem, and the solution does not come from the windows.

What causes windows condensation, and what can you, the homeowner, do about it? More and more homeowners are concerned about growing condensation problems… and they are growing. There are several explanations for this last remark. And for the most part, they can be traced to “progress.” For example, the “tight” construction of newer homes, the increasing use of modern labor saving appliances, certain building materials smaller homes, more gas furnaces, and additional showers. A little fog on the corners of your windows shouldn’t bother you. And it probably doesn’t. But “problem” condensation- fog or front that covers whole windows should bother you. These visible effects are just the tip of the iceberg. What is happening elsewhere in your home? In your attic, excess moisture may be freezing in the insulation, where it will later melt and damage your plaster or drywall. Or perhaps it’s forcing its way out through your siding, where it will form blisters under the exterior paint, or it may be promoting unhealthy mildew in your home.

What is Condensation?

Condensation is the result of high humidity that produces a “fog” once it hits a colder surface. The humidity is caused by excess water vapor in the home. This is commonly seen in a foggy mirror after a hot shower. Condensation usually occurs first on windows because glass surfaces have the lowest temperature of any of the interior surfaces in the home.

What causes High Humidity?

Humidity comes from excess water vapor in the air. All homes have a certain level of moisture due to the house hold activities. Activities, such as cooking, laundry and dish washing can add up to five pounds of water vapor into the air daily! Other moisture- producing agents include plants, heating systems and humidifiers. Seasonal changes, quick changes in temperature, reconstruction and remodeling can also add excess humidity temporarily into the air. During construction, large quantities of water are displaced into the air from building materials such as concrete, plaster, taping, etc. After one season of heating it will commonly dry out and your condensation problems will disappear.

Why wasn’t the condensation always there?

Today’s technology produces more energy efficient, “tighter” homes. This is great for keeping your home more comfortable, quieter and cleaner. But by sealing your home, you are also keeping moisture in. In today’s home it’s very easy to build up extremely high levels of humidity.

Does the Amount of Condenstation Depend on the Type of Windows I have?

Sometimes recessed windows like bow and bay windows usually experience more condensation than other window styles. This is because air circulated around those windows types is usually more restricted, and since they extend away from the insulated house wall, bays and bows could be a few degrees cooler in temperature. To diminish condensation, a smart installer will insulate under the seat and head of the unit. As a secondary measure, placing a common electric fan near the window to produce air circulation may also be helpful.

Further Tips to Reduce Home Humidity:

  1.  Be sure all ventilation to the outside is functional. Use kitchen and bathroom exhaust fans. Consider installing a laundry room exhaust fan. Run exhaust fans while the humidity-producing appliance is operating or the humidity producing activity is going on, and let them run a while after the activities have ended.
  2. Air out your kitchen, bathroom and laundry room during or just after use. Because outside air usually contains less water vapor, it will “dilute” the humidity of inside air. This takes place automatically in older houses through constant infiltration of outside air.
  3. The process of heating your home will reduce the relative humidity provided it’s dry heat. It will counter balance most or all of the moisture produced by modern living.
  4. If you have a furnace humidifier or other humidity device in your home, be sure it is adjusted to produce the proper amount of humidity, or turn it off. The humidity produced elsewhere in your home may mean these devices are not needed at this time.
  5. Be sure that louvers in attic or basement crawl spaces are open and that they are large enough.
  6. Open the fireplace damper to allow an easier escape for moisture.
  7. Install ceiling fans to keep air circulating within your home.
  8. If troublesome condensation persists, see your heating contractor about an outside air intake for your furnace, venting of gas burning heaters and appliances, or installation or ventilating fans.

Remember; by reducing the humidity in your home you will eliminate most, and probably all, of the condensation! Hopefully this has helped to clear up any confusion and questions you have concerning your new windows. Remember; windows do not cause condensation!

Between-the-Glass Condensation

Condensation between two pieces of insulated glass is not controllable and is an indication of glass seal failure.  In this case you should contact your window specialist or contractor to have them inspect the window. If a seal failure has occured the insulated glass will need to be replaced.

For Additional Information:

Ask Us Anything

 

Click Here

close